The owner of Ballistic Beige previously owned a saddle-tan painted 1963 Corvette in the 90’s as one of his early hot-rods. This project is commissioned to give him back a piece of his youth recreating that original look on the exterior and interior never straying too far aesthetically from the American Classic C2 Corvette. However, […]

KMC was commissioned on this build to create a custom intercooler setup in unison with a bespoke aluminum race bed. weather its the fully pie-cut plumbing configuration or the gratuitous use of flared holes this is sure to be a fabricator’s delight.

KMC was commissioned on this build to fabricate a slew of top shelf components. Some of which are: the aluminum V-mount intercooler and radiator shrouding and mounting attachments, the cold side intercooler plumbing and turbocharger intake done in delicious pie-cuts, a quickly removable rear trunk mounted electrical box and rear seat delete shrouding, a bolt […]

For this project we re-styled this classic Honda’s frame from the backbone rearward. First the frame tail section was chopped off and replaced with a shortened hump section, then  all the remaining frame and suspension welds were smoothed and blended. An aluminum seat pan was fabricated to hug the frame with a shorty fender incorporated […]

For this project we are transforming a family heirloom 72′ C-10 Pickup, purchased new within the family, into a reliable and fun daily driver for 16 year old Patrick. Patrick has also decided to get dirty lend a hand with his pickup transformation wherever possible. KMC will be working diligently along with Patrick in an […]

This C5Z is the new KMC Parts runner and will eventually transition to a track vehicle to test and show off some of the products we offer. Future plans include front and rear aero splitters, an SCCA spec cage, side exit exhaust, Recaro seats, rear wing, CCW CW14 Wheels and C6Z brakes, 1″drop spindles with […]